Product Code: KIT-UNO-BEGIN
Availability: In Stock
$22.58
Ex Tax: $22.58

Note: This is the beginner kit for Arduino UNO R3 lovers. It comes with everything (except computer) that you need to learn Arduino :)

This kit comes with Arduino UNO compatible board, UNO R3 Compatible with CH340. As most of shields and libraries are based on UNO, it is the best board to learn Arduino ecosytem. It is fully compatible with original Arduino UNO R3 (except for USB to UART chip - CH340), so all shields, examples, sketches for Arduino UNO R3 is applicable on this board.

Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently support Mac OS X, Windows, and Linux).

Now, with this comprehensive beginner kit which include the famous UNO R3 compatible as main controller. All the applications and projects you want can be done with this set. This kit is suitable for:

  • Engineering students: Controller and Electronics is a must have element in all engineering courses, Electronics, Mechanical, or even Civil Engineering. This kit is perfect for you to understand the basics of controller, electronics, sensors, actuator and programming.
  • Teachers: Perfect for student-teacher projects, example in RBT (Reka Bentuk Teknologi)
  • Electronic enthusiasts: Kickstart your next project utilizing all the component in this kit.
  • Robot Builders: All the sensors and actuators are suitable in robotics.
  • Software Engineers: Arduino will be an excellent platform for establishing interfaces on the computer to receive data from the outside world and for communication applications.

Features:

  • Comes with UNO R3 Compatible (CH340) board
  • Pack in a two layers plastic case, suitable for long usage and tidy storage
  • Includes various type of sensors, and actuators (motors, LEDs, buzzer)
  • Perfect for learning Arduino ecosystem, electronics, and programming
  • You only need a computer to get started
  • Power everything from your USB port which is needed for program loading in any cases.

Packing List:

  • 1 x UNO R3 CH340 (Arduino UNO R3 compatible) board
  • 1 x USB Type B Cable, to power and program loading into UNO R3 CH340 board, 40cm length
  • 1 x 30 Jumper Cable Male to Male
  • 1 x 10 ways Dupont Male to Female wire
  • 1 x Large Size Breadboard, 830 holes
  • 1 x Four segments 7 Segment Display
  • 1 x Single 7 Segment Display
  • 1 x 8 * 8 Dot Matrix
  • 1 x LCD 16 * 2 Character
  • 1 x UNL2003 Driver board
  • 5 x 5 mm Red LED
  • 5 x 5 mm Green LED
  • 5 x 5 mm Yellow LED
  • 1 x 28BJJ Unipolar Stepper Motor
  • 1 x SG90 Servo Motor
  • 1 x 9V Battery
  • 1 x 9V Battery Clip Arduino Compatible
  • 5 x 220R Resistor
  • 5 x 10K Resistor
  • 5 x 1K Resistor
  • 1 x 10K potentiometer/variable resistor
  • 1 x Male Header 1 x 40, for solder 2x16 Character LCD
  • 1 x Arduino Proto Shield with small breadboard
  • 1 x Active Buzzer
  • 1 x Passive Buzzer
  • 4 x Yellow Cap Push Button
  • 1 x LM35 Temperature sensor
  • 1 x Tilt sensor
  • 1 x 5mm LDR
  • 1 x IR sensor (LED shape)
  • 1 x Infrared Remote Control Receiver
  • 1 x IR Remote (battery CR2025 not included)
  • 1 x 74HC595N IC, Serial to Parallel IC for Output pin expansion
  • 1 x Small SMD parts case

There are no reviews for this product.

Write a review

Note: HTML is not translated!